One of our customers uses S&A CWUL-10 water chiller for the cooling of UV laser with low optical los

The UV laser light source that must be cooled with a water chiller has high requirement on the temperature control precision of water chiller to guarantee a small fluctuation in water temperature. This is because that an increase in water temperature fluctuation will lead to more optical loss, which would affect both of the laser processing cost and the service life of laser.
According to the requirement of UV laser, S&A launches CWUL-10 water chiller that has been designed purposely for UV laser.
The 15W Inno and Newport UV lasers used by the customer require the temperature difference within a range of ±0.1 ℃, and the customer chooses S&A CWUL-10 water chiller (±0.3 ℃ ). After the operation for one year, the optical loss is measured less than 0.1W, which indicates that S&A CWUL-10 water chiller has a small fluctuation in water temperature with stable water pressure that can fully meet the cooling requirement of 15W UV laser.
Now let's have a brief understanding of the advantages of S&A CWUL-10 water chiller when it’s used for cooling UV lasers:
1. With a reasonable piping design, S&A CWUL-10 water chiller can significantly prevent the formation of bubbles to stabilize the light extracting rate of laser and extend the service life.
2. With ±0.3℃ precisely temperature control, it can also meet the temperature difference requirement (±0.1℃) of laser with low optical loss, small fluctuation in water temperature and stable water pressure; 
Data obtained from the test conducted by the customer about the use of S&A CWUL-10 water chiller for the Inno and Newport UV lasers is provided as below: